Titanium Processing Capability | Titanium Metal Supplier and Manufacturer

Equipment – Forging

Thanks to our strong processing capabilities, we always control product quality from the source and pay attention to every aspect of the product production process.

Equipment – Bar Processing

Titanium Bar Dimensions: Diameter 8 – 400 mm

Monthly Output: 200 tonnes

Dimensional Tolerances for Titanium Bars

Diameter (mm)	Hot forged bar tolerances (mm)	Hot extruded bar tolerances (mm)	Hot rolled bar tolerances (mm)
>15~20	±1.5	+0.8, -1.0	+0.7, -0.5
>20~35	±2.0	±2.0	+1.2, -0.5
>35~50	±2.5	±2.5	+1.5, -1.0
>50~80	±3.0	±2.5	+2.0, -1.0
>80~125	±3.5		+2.2, -1.2
>125~150	±5.0		–
>150~200	±6.5		–

Table#1

Diameters And Types Of Titanium Wire

Průměr & Types
Diameter Range		Types
mm	Inch	Coil	Spool	Rovně
0.05 to 0.78	0.002 to 0.031	Y	Y	N
>0.78 to 3.25	>0.031 to 0.128	Y	Y	Y
> 3.25 to 6.00	> 0.128 to 0.236	Y	N	Y

Table#2

Diameter Tolerance: +/-0.05mm (+/-0.002”) or finer. Spools: 100mm – 300mm (3.9” – 12”). Straight Length: 300mm – 3000mm (12” – 118”)

Titanium Sheet Specification

ASTM Grades	Processing thickness (mm)		Delivery Status*	Sizes (Thickness × Width × Length) (mm)
ASTM Grades	Rolling	Size Range	Delivery Status*	Sizes (Thickness × Width × Length) (mm)
1, 2, 3, 4, 7	Hot Rolled	0.3 < t < 4.0	R/ M	0.3-0.5 × 400-600 × 15000 0.6-0.8 × 400-800 × 1200 0.9-6.0 × 400-1000 × 1000-3000 6.1-15 × 400-2000 × 1000-4000 16-60 × 400-2800 × 1000-5600
1, 2, 3, 4, 7	Cold Rolled	4.1 < t < 60	Y/ M
12	Hot Rolled	0.5 < t < 4.0	R/ M
12	Cold Rolled	4.1 < t < 60	Y/ M
5, 6	Hot Rolled	0.8 < t <4.0	R/ M
5, 6	Cold Rolled	4.1 < t < 60	Y/ M

Table#3

* The titanium plates generally use the hot-rolled and cold-rolled process. Supply statuses are: hot-rolled state (R), cold-rolled state (Y), annealed (M), quenched state (C).

Titanium Plate, Medical

Yutong Metal provides medical grade titanium to meet the ever growing demand for titanium implants such as titanium bone structure supports, titanium prosthetics, titanium tooth implants.

Medical titanium plate
No.	Školní známka	Size (mm)	Povrch	Standard
1	Gr. 1, 2, 3	3 x 11 x (500~1000)	bright	ASTM F67
2	Gr. 1, 2, 3	3.5 x 12 x (500~1000)	bright	ASTM F67
3	Gr. 1, 2, 3	4 x 14 x (500~1000)	bright	ASTM F67
4	Gr. 23	Thickness 3~60	bright	ASTM F136

Table#4

Titanium Plate, Heat Exchanger

One of the widest and most current uses of titanium plate and sheet today is for its use in titanium heat exchangers. From the miniature fish tank heat exchangers used to maintain correct water temperature right through to some of the worlds largest industrial ti heat exchangers. Yutong Metal provides the highest quality ti sheet and ti plate to meet all requirements and application.

Titanium sheet for plate heat exchanger
Školní známka	Size (mm)			Status	Standard
Školní známka	Tloušťka	Width	Délka	Status	Standard
Gr. 1, Gr. 7	0.5~0.8	200~500	500~2000	M	ASTM B265
	0.9~1.0	200~500	500~2000	M	ASTM B265
	0.5~0.8	500~800	800~2000	M	ASTM B265

Table#5

Titanium Sheets and Plates Specifications

The table below details the specification of titanium plates which Yutong Metal provides by titanium grades, titanium sheet thickness, size, surface finishing and the production technique.

Školní známka	Grade1, Grade 2, Grade 3, Grade 4, Grade 5, Ti-6AL4V ELI, Grade7, Grade 9, Grade 12
Tloušťka	0.3mm – 400mm
Velikost	10002000mm, 24006000mm
Povrch	Polished, Mill, Pickling, Painted, Brushed or Blasted /Titanium Sheet Surface Finish/
Technika	Hot or cold rolling or annealed

Table#6

Titanium Grade Tensile Requirements

Školní známka	Tensile strength (min)		Yield strength (min)		Prodloužení (%)
Školní známka	ksi	MPa	ksi	MPa	Prodloužení (%)
1. třída	35	240	20	138	24
2. třída	50	345	40	275	20
3. třída	65	450	55	380	18
4. třída	80	550	70	483	15
5. třída	130	895	120	828	10
7. třída	50	345	40	275	20
9. třída	90	620	70	483	15
12. třída	70	483	50	345	18
23. třída	120	828	110	759	10

Table#7