ตาข่ายไทเทเนียม

ข้อมูลทั่วไป

  • Material: Gr1, Gr2 (CP Ti)
  • กำลังประมวลผล: Expanded, Stamped
  • Opening:
    Expanded: Diamond Openings, per following specifications
    Stamped:Circular Holes or other custom shape. Opening size larger than Titanium sheet thickness.
Titanium mesh (expanded mesh, and stamped mesh) is made by titanium sheet, which is ASTM B265 specified commercial pure titanium sheet. The strength for alloyed titanium is too high to be stamped or expanded. The width of the mesh we can provide will be the same with sheet, the length of stamped mesh is the same as sheet while the length of expanded mesh depends on the opening & sheet size.

ข้อมูลจำเพาะของผลิตภัณฑ์

Item Name Titanium Expanded Mesh Titanium Stamped Mesh
วัสดุ Gr1, Gr2 (CP Ti) Gr1, Gr2 (CP Ti)
กำลังประมวลผล Expanded Stamped
Opening Diamond Openings, per following specifications Circular Holes or other custom shape. Opening size larger than Titanium sheet thickness.
Overall size Per following specifications Max: 1m width x 2m Length Maximum

Opening Sizes And Mesh Overall Size For Titanium Expanded Mesh

Sheet Thickness Width x Length Mesh Open Size Mesh Stem
0.3mm ~0.8mm

0.8mm~2.0mm
1000mm x 2000mm

1000mm x 3000mm
50mm x 25mm 2.0mm
20mm x 10mm 2.0mm
20mm x 7mm 2.0mm
16mm x 8mm 1.5mm-2.0mm
15mm x 5.5mm 1.5mm-2.0mm
13mm x 7mm 1.5mm-2.0mm
12.5mm x 4.5mm 1.5mm-2.0mm
12.5mm x 6mm 1.5mm-2.0mm
10mm x 5mm <1.0mm
8mm x 5mm <0.8mm
6mm x 3mm <0.6mm
4.6mm x 2.5mm <0.6mm
4mm x 3mm <0.3mm
3mm x 2mm <0.3mm

The listed opening size will be limited by sheet thickness and final mesh thickness. Titanium expanded mesh can be provided as flattened and unflattened, it will be supplied as un-flattened if no special requirement.

TITANIUM FLATTENED EXPANDED MESH
EXPANDED MESH – TYPE A: STANDARD EXPANDED MESH

It is the original and most popular type of expanded mesh with the familiar diamond shaped opening. The strands are turned at a sharp angle to the plane of the sheet giving a dimensional appearance to the finished material. The final mesh thickness will be larger than raw sheet thickness.

EXPANDED MESH – TYPE B: FLATTENED EXPANDED MESH

It is produced by passing standard mesh through heavy rolls that flat- ten the strands and bridges to pro- vide an overall level surface. This process, which reduces the original thickness by approximately one gauge, delivers a product particularly suited to applications where a slidable surface is required. The final mesh thickness will be the same as raw titanium sheet thickness.